Snappi® fasteners must be used responsibly, and need to be used correctly in order to work effectively
STRETCH the Snappi® fastener before its first use. The stretching triggers the ‘memory’ of the Snappi® to return to its original size, and in so doing, will pull the diaper together to the middle to allow for a snug fit. This is essential for the Snappi® to work properly. This can be done by holding the Snappi® in the center with one hand, and close to the end of the leg with the other hand. Then s-t-r-e-t-c-h a few times (10 or so). As you do this you should feel how the material ‘softens’ or gets more elastic. Follow this stretching procedure with each leg. The Snappi® is now ready to go!
Make sure that the Snappi® is ATTACHED SECURELY. It is important that the Snappi® ‘leg’ being attached be stretched across the diaper before hooking it into the diaper. When attaching the Snappi, hold the solid part of the tab, do not pull on the loops.
By following these instructions, the Snappi® should be secure and the diaper will fit snugly. ALWAYS place a cover over the diaper and Snappi® fastener.
Snappi®s WORK BEST with terry cloth diapers, cotton prefolds (Indian or Chinese), and other cloth diapers with a loo
Snappi®s WORK BEST with terry cloth diapers, cotton prefolds (Indian or Chinese), and other cloth diapers with a loose enough weave for the Snappi® to hook into. They DO NOT work well with tightly woven diapers.
CARE: Clean your Snappi® in hot soapy water. Do not launder them with diapers in the washer as this may weaken the grip attachment.
The Snappi® fastener is manufactured from FDA approved raw materials, a polyester based polyurethane which is degradable on aging through hydrolysis and/or microbiological attack. It contains NO latex or any other adulterant, dilutent or modifying polymers. The composition is 100% polyurethane. It is made in South Africa.